Floor Stripping and Waxing Company: What to Avoid Before hiring
The floor is the most used and frequently used place in the building, so it requires more regular floor stripping and waxing services than other parts of the building to keep the environment clean.
Floor Stripping and waxing don’t seem to be difficult, do they?
If you don’t know what you’re doing or don’t have the right directions, stripping and waxing a floor can be a time-consuming and backbreaking job.
Is your floor in need of waxing and stripping by a professional? In order to get a professional detailed super floor clean, you should avoid these things before hiring the floor waxing and stripping contractors in New York.
Use a solution to exclude the old wax and apply fresh wax, and in no time, your floors are as good as new. Eventually it is not that easy!
It’s not your cleaning service’s fault if your floors aren’t sparkling anymore; they might simply have to be fixed up by a floor stripping and waxing company.
Commercial floors should be stripped and waxed to ensure longer-lasting surfaces, but a few common mistakes may have the opposite effect.
Stripping and waxing residential and commercial floors are, first and foremost, a learned art. It’s possible to make mistakes when people try a job for the first time without adequate preparation or experience.
Many of the most common mistakes, despite their apparent insignificance, can cause significant damage to your floors. That’s why hiring a professional commercial cleaning company will make all the difference in your floors’ final appearance and durability.
Check out these things before you hire a floor waxing and stripping company near you.
knowledge of the different types of flooring
Before you begin the process of stripping and waxing, you must first determine what type of flooring you will be dealing with. Hardwood, laminate, vinyl, and tile, including ceramic, porcelain, and natural stone, are the various flooring styles. Vinyl composition tile, or VCT, is commonly used in commercial buildings due to its low cost and ability to withstand heavy traffic.
Knowing the various types of flooring is crucial because the care required for each differs, and using the incorrect chemical can be expensive and potentially damaging to your floor.
Waxing Isn’t enough
Businesses also have their floors waxed and then feel they will not need to do so again for a long time. Waxing is required regularly for any surfaces that receive a lot of traffic. Under the weight of heavy traffic, the wax used to cover your flooring surfaces degrades easily. Even if the floor seems to be in good condition, it doesn’t mean the wax hasn’t broken down or dirt hasn’t found its way into the pores.
To prevent damage from occurring, floors should be stripped and waxed regularly. Depending on how much traffic the building gets, floors can be stripped biweekly, monthly, or bimonthly. If you’re working with a wide area, it may be more practical to do the stripping and waxing in cycles.
Using inappropriate equipment
To do the job properly, the equipment must be in excellent condition. If the machine isn’t working properly, is spinning at too high a speed, or is old and rusty, it could cause problems that damage the floors you’re trying to protect.
Use of inappropriate chemicals
This blunder is linked to a lack of knowledge of the various styles of flooring. Since VCT and natural stone are two different materials, the solution required for VCT flooring would vary from that required for natural stone. Using the incorrect chemical solutions will not produce the desired results and will destroy your floor.
Ratios of chemical to water dilution are inaccurate
The right chemical-to-water dilution ratios are important. If you use too much or too little of either material, the entire solution will be rendered ineffective, and the floor will be permanently damaged. Adding more chemicals to a solution than is needed will not make it stronger. In reality, it could make the process of stripping more difficult.
Chemical burns and other complications from exposure to caustic gases and unhealthy levels of volatile organic compounds, or VOCs, may also result from incorrect chemical-to-water dilution ratios.
Not having the required equipment
You begin the job only to discover that you lack all of the requisite equipment to complete it. The work necessitates more machinery than is commonly thought, such as a defoamer with a wet/dry vacuum. As a result, you can end up with unfinished surfaces that are more vulnerable to damage while you wait for the necessary equipment to arrive.
Time and focus is ineffective
You must not only use the proper chemical-to-water dilution ratio when making your solution, but you must also allow it to stay on the floor for long enough to absorb completely without drying.
This is referred to as the focused time of the solution. The focused time, which varies from chemical to chemical, is critical in the finish removal process. Check the chemical’s label for instructions on how long to dwell.
Waiting for the solution to dry
Stripping solutions should never be left to dry on the floor because they can make removing the finish more difficult. When a solution is added too thinly, this may happen. Another reason may be that the area you’re working in is too big, and the solution is too far away for you to finish in time, allowing the solution to dry until you scrub it.
If you wait too long for the solution to dry, you’ll have to restart the procedure because the finish has become more difficult to remove. To avoid making this mistake, use a sufficient amount of solution and work section by section to ensure even distribution and avoid wasting items.
Negligence to wear proper safety equipment
While cleaning, it’s just as important to protect yourself as it is to protect others. Before you begin any floor work, double-check that you have all of the requisite safety equipment. Shield yourself from injuries and other risks by wearing non-slip shoes, gloves, goggles, and face masks.
Not imposing safety cones in the near area
During and after the process, safety cones keep people away from freshly stripped and waxed floors. This is why working in smaller locations is beneficial, as it prevents you from blocking off too much of your business at once. There must be some dwell time, during which the cones must remain in place.
Taking the risk despite having no prior experience
Floors that have been stripped or waxed. Stripping floors is a difficult task that necessitates expertise and experience to avoid damaging surfaces. Breaking through wax layers and causing damage to flooring surfaces is easier than one would think.
Floorcare is not practiced regularly
Every six months, we recommend stripping and waxing your floor to keep it in top shape. Due to a lack of regular floor care, minor issues will worsen over time, resulting in more serious future issues.
If you consider the above points before hiring a floor stripping and waxing company, you’ll definitely get the best deal who not only clean the floor but also extend the floor age by professional floor waxing and stripping skills.
Having a professional cleaning team on your side ensures that no mistakes will be made by the members. Our Top Notch Cleaning NY Team offers excellent floor stripping and waxing services for all types of floors in New York City and the Tri-State Area.
We will extend the life of your floors and improve their appearance for several years to come. Contact us to get free of cost floor waxing and stripping quotes.